3LPP Coating Pipe a wɔde kata so

3LPP coating pipe yɛ abɔnten pipeline ahobanbɔ nhyehyɛe a ɛyɛ adwuma yiye a wɔayɛ ama ɔhyew a ɛkorɔn-ɔsom ne mfiridwuma tebea a ɛhwehwɛ pii. 3LPP nhyehyɛe no yɛ:
1.Fusion-Bonded Epoxy (FBE) primer – ɛma adhesion a emu yɛ den ne corrosion a ɛko tia.
2.Copolymer adhesive – hwɛ hu sɛ ɛkorɔn peel ahoɔden ne bonding ahotoso.
3.Polypropylene (PP) akyi layer – de soronko mfiridwuma toughness, abrasion resistance, ne ɔhyew a ɛgyina pintinn kosi 110-120℃kɔ so adwumayɛ.
Sɛ wɔde toto 3LPE ho a, wɔpɛ 3LPP wɔ mmeae a ɛyɛ hyew, anhweatam so nneɛma a wɔde si hɔ, ne nsu afiri a ɛde ngo a ɛyɛ hyew anaa mframa a ɛyɛ hyew-ɔhyew kɛse, baabi a polyethylene adwumayɛ betumi asɛe.

• ISO 21809-1 na ɛwɔ hɔ– Amanaman ntam gyinapɛn a ɛfa adwumayɛbea-a wɔde 3LPP a wɔde kata nsuo afiri a wɔasie anaa wɔde ahyɛ nsuo ase so.
• DIN 30678 na ɛwɔ hɔ– Germanfo nkyerɛkyerɛmu a ɛkyerɛkyerɛ coating thickness, impact resistance, indentation, ne peel sɔhwɛ ahorow.
• Mmara sodi foforo:NACE, EN, ne project-DEP gyinapɛn pɔtee a ɛwɔ hɔ.
• Pipe Range a Wɔtaa Yɛ:4′′ – 56′′ (a wɔahyɛ da ayɛ no kosi 60′′)
• Coating Thickness: 1 .2.5 – 5.0 mm gyina OD ne ɔsom adesua so
• Ɔhyew Adesuakuw:Ɔsom a ɛkɔ soro kodu digrii 120

• 2LPP: 1 .Primer + PP jacket nkutoo na ɛwɔ hɔ; ɛnyɛ den pii wɔ cathodic disbondment ho sɛ wɔde toto 3LPP ho a.
• 3LPP: 1 .Full abiɛsa-layer nhyehyɛe a adhesive tie; ɛkorɔn wɔ bonding, ahoɔden a ɛtra hɔ kyɛ, ne ɔhyew a ɛma ɛyɛ den mu.
• 3LPE: 1 .Adwene a ɛte saa ara a ɛyɛ abiɛsa-layer nanso ɛwɔ polyethylene jacket; optimal ma < 80℃service ne ɛka-a ɛyɛ papa sɛ wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so.
• Wɔ nneyɛe mu no:Wɔakyerɛ 3LPP ama mmeae a ɛhɔ yɛ hyew kɛse na mfiri yɛ basabasa, bere a wɔapaw 3LPE ama nsu afiri a wɔasie a ɛyɛ gyinapɛn.

• Ahosiesie a wɔyɛ wɔ asase ani– Abrasive blasting to Sa 21⁄2, a ɛma ɛyɛ anchor profile.
• Induction ɔhyew a wɔde yɛ adwuma– Pipe a wɔayɛ no hyew akodu ~200–220 digrii .
• FBE primer a wɔde di dwuma– Electrostatic spray a ɛyɛ fusion-bonded epoxy.
• Copolymer adhesive a wɔde di dwuma– Co-extruded anaa powder kwan, a ɛma bond.
• Polypropylene a ɛwɔ soro a wɔde yiyi mu– Thick abɔnten layer a wɔde ahyɛ mu, a wɔahyɛ no den wɔ nhyɛso ase.
• Cooling & cutback ahosiesie– Controlled quench, beveled cutbacks ma afuw welding.
• Nhwehwɛmu a etwa to– Thickness mapping, nnapɔnna detection, peel/impact/indentation sɔhwɛ ahorow.

• Nsusuwii a ɛfa ne kɛse ho sɛnea DIN 30678 & ISO 21809-1.
• Holiday (spark) sɔhwɛ a wɔde hwɛ pinholes.
• Impact & indentation resistance wɔ ɔhyew a ɛkorɔn mu.
• Nsu a ɛyɛ hyew soak & cathodic disbondment sɔhwɛ ahorow.
• Peel ahoɔden & adhesion nokwaredi.
• Traceability a edi mũ a ɛwɔ EN 10204 3.1/3.2 adansedi nkrataa.

• Nsuo afiri a ɛyɛ hyew (onshore & sare so akwan) .
• Abɔde mu mframa a ɛkɔ soro-ɔhyew a ɛkɔ soro
• Nsu afiri a ɛwɔ abotan a ɛwɔ akyi anaa HDD crossings (abrasion a ɛkɔ soro) .
• Offshore risers & subsea lines a ɛhia sɛ wɔde mfiri bɔ ho ban a ɛyɛ den
• Ɔmantam mu ɔhyew nsu afiri

• Nhama a wɔde kata so a ɛkɔ akyiri a ɛne DIN 30678 / ISO 21809-1 ahwehwɛde ahorow hyia.
• Custom thickness ne cutback options ma nnwuma a ɛyɛ den.
• Wɔada no adi sɛ ɔhyew a ɛkorɔn-ɔyɛ adwuma wɔ sare so ne mpoano dwumadie mu.
• LSAW, SSAW, ERW, ne paipu a ɛnyɛ den a wɔde kata so a wɔde ma a wɔaka abom.
• QA/QC a ɛyɛ katee, nneɛma a wɔde ma ntɛmntɛm, ne wiase nyinaa adwuma no ho nkyerɛkyerɛmu.

• Sestɛm:FBE + Ade a wɔde kata ade + Polypropylene (3 layers) .
• Gyinapɛn ahorow:ISO 21809-1, DIN 30678. Ɔde ne nsa kyerɛɛ ne so
• Pipe Range a Ɛwɔ Hɔ:4′′ – 56′′ (a wɔahyɛ da ayɛ no kosi 60′′)
• Coating Thickness: 1 .2.5 – 5.0 mm
• Ɔsom mu Ɔhyew:Ɛkɔ soro kodu digrii 120
• Nnwuma a Wɔde Di Dwuma:Hot oil & gas pipelines, HDD, asase a abotan wɔ so, nsuo a ɛkɔ soro wɔ mpoano

Adansedi nkrataa

 

CE Adansedi Krataa

ISO 9001 Adansedi krataa

API Q1 Adansedi krataa

ABS Adansedi krataa

AP-5L Adansedi krataa

API-5CT Adansedi krataa

 

Tags a ɛyɛ hyew .: 3lpp coating pipe, China 3lpp coating pipe ayɛfo, wɔn a wɔde nneɛma ma, adwumayɛbea