7-Point Spot Check: UNS S20910 (XM-19) Dade a ɛnyɛ den nkaa

Wɔawie-Aguade no Spot Check: Austenitic Dade a Ɛnyɛ Den Nkaa (UNS S20910 / XM-19 / NITRONIC® 50)

ID 178 OD 194 H 17 mm stainless ring dimensional verification

Wɔawie-Aguade no beae a wɔhwɛ ma UNS S20910 / XM-19 Austenitic Stainless Steel Rings

Sɛnea ɛbɛyɛ a ɛbɛboa stable fit-up, adwumayɛ a wotumi san yɛ bio, ne batch traceability a edi mũ no, Octal Pipe wiee aawie-afiri no spot checkwɔ nhyehyɛe a wɔayɛ no sɛnea wɔpɛ soaustenitic dade a ɛnyɛ den nkaawɔyɛɛ no wɔUNS S20910 / XM-19 (NITRONIC® 50) Ɔkwan a wɔfa so yɛ aduru a ɛma obi nya apɔwmuden.. Saa nhwehwɛmu yi twee adwene sii nsusuiɛ a ɛyɛ pɛpɛɛpɛ, ɔfasuo tebea, nneɛma a wɔhunu, ne nkrataa a ɛne ne ho hyia-enti wɔbɛtumi ahwɛ sɛ nkaa a wɔde ama no yie wɔ nhwehwɛmu a ɛreba no mu.

Order & Spot Check Nsɛm a Wɔaboaboa Ano

stainless steel ring packing and shipment readiness inspection

Order Overview

Nneɛma a wɔde yɛ / Grade: UNS S20910 / XM-19 / NITRONIC® 50. Nnipa a wɔde wɔn ho hyɛ mu(austenitic dade a ɛnyɛ den) .

Adwadeɛ: Ring a Wɔayɛ no sɛnea wɔpɛ (Anillos na ɔkyerɛwee)

Nsusuwii ahorow: ID 178 mm × OD 194 mm × Ɔsorokɔ 17 mm

Thickness / Ɔsorokɔ: 17 mm

Ahwehwɛde Titiriw: Stainless (nneɛma a ɛyɛ pɛpɛɛpɛ + traceability) .

Spot-Hwɛ Scope (Stage a Wɔawie) .

Wɔyɛɛ spot check no twaa "drawing-critical dimensions + material consistency + shipment readiness" ho hyiae:

Nsusuwii mu nokwaredi: ID / OD / sorokɔ (17 mm), ne ring geometry a ɛkɔ so pɛpɛɛpɛ

Visual & surface tebea: soro wie tebea, mfiri agyiraehyɛde, burr / ano tebea, sintɔ ahorow a wotumi hu

Nneɛma a wɔde kyerɛ: batch-level verification a ɛne ring agyiraehyɛde / ɔhyew anaa batch nkyerɛkyerɛmu hyia

Nneɛma a wɔde kyekyere nneɛma & labeling match: wɔahwɛ adeɛ no din, nneɛma a wɔde ahyɛ mu, ne nneɛma titire a wɔkra ho nsɛm cross{0}}sɛ sɛ ɛyɛ pɛpɛɛpɛ anaa

UNS S20910 XM-19 ring labeling and traceability verification

Spectrometer PMI data for UNS S20910 XM-19 NITRONIC 50 stainless steel ring

Nneɛma a Wɔde Yɛ Adwuma Nsɛntitiriw: Nea Enti a UNS S20910 / XM-19 (NITRONIC® 50)

UNS S20910 (XM-19 / NITRONIC® 50) yɛ nea wɔpaw no kɛse bere a nnwuma hiaahoɔden ne nsɛe a ɛko tia wɔ austenitic stainless grade biako mu, titiriw baabi a dimensional stability ne service ahotoso ho hia.

Ahoɔden a ɛkorɔn vs austenitic grades a wɔtaa de di dwuma(wɔtaa ka ho asɛm sɛ ahoɔden a ɛma aba no kɔ soro kɛse bere a wɔde toto nneɛma a ɛwɔ adesuakuw 316 ho no, egyina tebea so)

Ahoɔden a ɛko tia general corrosionwɔ nsɛm ho amanneɛbɔ pii mu no, wɔtaa de si hɔ sɛ eye sen 316/316L ne 317/317L wɔ mmeae pii

Non-magnetic su wɔ awɔw adwuma / ɔhyew a ɛba fam tebea horow muwɔtaa ka ho asɛm ma XM-19, na ɛfoa nsɛm a wɔde di dwuma a magnetic mmuae yɛ ade a ɛhaw adwene no so

Anti-galling a ɛfatawɔtaa si so dua ma component-style applications a sliding contact betumi aba

Nwoma & Traceability Alignment

Wɔ spot check no mu no, wɔdii edidi so yi ho adanseɛ sɛ "field-ready" acceptance flow:

Grade a wɔde hyɛ mu: UNS S20910 / XM-19 na ɛwɔ hɔ

Nsusuwii a ɛne ne ho hyia: ID 178 × OD 194 × Ne tenten 17 mm

Traceability ahoboa: marking/label ho nsɛm a ɛne document pack ne packing list no hyia

XM-19 UNS S20910 customized ring order details and documentation

UNS S20910 XM-19 stainless steel ring labeling packing list and traceability check

Ɔhaw a Ɛtaa Ba

Dɛn ne UNS S20910 / XM-19 (NITRONIC® 50)?

Ɛyɛ nitrogen-ahyɛde den austenitic dade a ɛnyɛ den a wɔtaa paw esiane ne kari pɛ a emu yɛ den a ɛko tia nsɛe ne ahoɔden a ɛkorɔn sen austenitic grades a ɛyɛ gyinapɛn nti.

Dɛn nti na wobɛtu mmirika awie-afiri spot check wɔ customized rings so?

Efisɛ ring afã horow no yɛ nhyiam-sensitive. Spot checks si drawing-critical ID/OD/height no so dua na ɛtew mismatch asiane so wɔ incoming inspection ne fit-up.

Nsusuwii bɛn na na ɛho hia kɛse ma saa kuw yi?

ID yɛ mm 178, OD yɛ mm 194, na ne sorokɔ yɛ mm 17, a nea ɛka ho ne nea ɛkɔ so pɛpɛɛpɛ wɔ ring geometry no nyinaa mu.