SSAW Pipe a Wɔde Yɛ Nneɛma

Asɛm no nyɛ "brochure ahorow" a ɛtrɛw sen biara. Asɛm no ne sɛ wobɛpaw astable range a ɛyɛ denwubetumi atu mmirika da biara da wɔ wo botae a wode asi w’ani so no so.

• Coil loading → leveling / anoano ahosiesie
• Spiral forming (afã a wotumi sesa) .
• SAW mu + SAW akyi (multi-wire) .
• Online seam tracking + intanɛt so UT (wɔpɛ sɛ wopaw denam spec so) .
• Flying cut-off → awiei hwɛ & beveling
• Hydrostatic sɔhwɛ → UT/RT a etwa to (sɛnea ɛho hia) .
• Agyiraehyɛde, susuw, stacking & dispatch

Sɛnea ɛbɛyɛ aSSAW Pipe a Wɔde Yɛ Nneɛma, adetɔfo nhwɛ "so wubetumi ayɛ weld" kɛkɛ. Wɔn ho hia wɔnstable a ɛkɔ so yɛ nneɛma, weld seam consistency, ne sɛ ebia wɔahyehyɛ line no sɛnea ɛbɛyɛ a ebehyiawo gye a wogye tom adwuma nhyehyɛea wɔmfa NDT/sɔhwɛ nkɔ bottleneck no mu.
WɔOctal Pipe a Wɔde Yɛ Nneɛma, yɛhyehyɛ SSAW line no twa wo OD/thickness window, botaeɛ gyinapɛn, ne afifideɛ nhyehyɛɛ ho hyia-enti output ne quality kɔ so kari pɛ wɔ ankasa production mu.

1. Coil / Strip Nhwehwɛmu & Traceability (Fi ase Hohoro, Tena Traceable)

Yebetumi ayɛ biakocoil/strip nhwehwɛmu + agyiraehyɛde a wotumi hwehwɛ muwɔ anim awiei, enti wobetumi de paipu biara asan abata nneɛma a wɔde yɛ adwuma ne sɛnea wɔyɛ ho kyerɛwtohɔ ahorow ho.
Nea enti a ɛho hia:sɛ owura no audits anaa third-party inspection ba a, traceability brɛ akasakasa ase na ɛma gye tom ntɛmntɛm.

2. Edge Prep a ɛma Spiral Seam no gyina pintinn

SSAW aba taa yera wɔ seam-efisɛstrip ano tebea no drifts. Yɛde maedge milling/twitwiw a wɔde twitwiw anooptions (tolerance level configurable) a ɛbɛma edge geometry ayɛ pɛpɛɛpɛ ansa na wɔayɛ na SAW. Edges a ɛkɔ so daa tu mpɔn fit-up na ɛtew lack-of-fusion repairs bere a ramp-up.

3. Strip Joining + Accumulator (Kɔ so Yɛ, Gyinae kakraa bi) .

Sɛnea ɛbɛyɛ a line no bɛkɔ so ampa no, Octal Pipe betumi ayɛ nhyehyɛestrip awiei twitwa + butt welding + accumulator(baabi a tumi nhyehyɛe hwehwɛ).
Nea enti a ɛho hia:line gyinabea kakraa bi=weld parameters a ɛyɛ den kɛse ne output ankasa a ɛkorɔn (ɛnyɛ "theoretical capacity" kɛkɛ).

4. Spiral Forming ne Adjustable Angle (Ankasa Diameter Flexibility) .

Forming ɔfã no yɛ nhyehyɛe neadjustable forming angle a ɛyɛ fɛne stable roller nhyehyeɛ a ɛbɛboa wo OD range a enni mfiri a wɔsan yɛ no mpɛn pii, diameter flexibility yɛ mfasoɔ sɛ wɔdi nsakraeɛ so na wɔtumi san yɛ bio-ɛnyɛ "ɛyɛ yie wɔ krataa so."

5. Mfinimfini + Abɔnten Multi-Wire SAW (Wɔahyehyɛ no denam Thickness & Target Speed ​​so) .

Yɛyɛ nhyehyɛeSAW mu + SAW akyinemulti-wire nhyehyɛe ahorow(wire dodow ne deposition tumi a wopaw denam wo thickness window ne botae ahoɔhare so). Wopɛ sɛ penetration stabilityneahoɔhare a wɔde yɛ nneɛma-a enhia sɛ "wobrɛ ase na ama woakɔ so ayɛ nea ɛyɛ papa."

6. Online Seam Tracking + Online UT (Wɔpɛ denam Spec so, Ɛnyɛ Marketing Add-Ons)

Octal Pipe betumi ayɛ biakoseam tracking a wɔde di dwumasɛnea ɛbɛyɛ a welding ti no ne spiral seam no bɛyɛ pɛ, neintanɛt so UTbere a wo spec anaa customer hwehwɛ sɛ wodi kan hu sintɔ. Ɛtew adwuma a wɔsan yɛ so na ɛboa ma aba no gyina bere a wɔde rehyɛ adwuma mu, titiriw wɔ OD akɛse ne ɔfasu a ɛyɛ den so.

7. Hydrotest + NDT a etwa to + Finishing (Gye a wogye tom-Ayɛyɛde a wɔde bɛma) .

Yɛhyehyɛ hydrostatic sɔhwɛ ne NDT bun a etwa to (UT/RT) .sɛnea wo gye a wogye tom no hwehwɛ no, na fa toto line speed ho sɛnea ɛbɛyɛ a QA rennye throughput. Finishing betumi ayɛ nea ɛka hoflying cut-off, awiei hwɛ & beveling, ahotew, agyiraehyɛde, ne nneɛma a wɔde boaboa ano.
Nea enti a ɛho hia:ɛsɛ sɛ nsu paipu fa po so hyɛn muadwumabea-ayɛ krado, a nhwehwɛmu scope a ɛne apam no hyia-ɛnyɛ patchwork a ɛfa add-ons akyiri yi.

Adetɔfo dodow no ara nhia ntotoho tenten-wohia gyinaesi kwan tiawa.

Mmara a mfaso wɔ so:

Sɛ wo project no yɛ driven byvolume + OD a ɛyɛ mmerɛw→ SSAW taa yɛ ROI kwan a ɛyɛ ntɛm.

Sɛ wo project no yɛ driven byadwumayɛ/owura ahwehwɛde ahorow a ɛyɛ katee yiye→ Ebia wɔbɛpɛ LSAW.

Di nkitaho mprempren

Ɔhaw a Ɛtaa Ba

Q1: Dɛn ne SSAW Pipe Production Line?

A: AnSSAW Pipe a Wɔde Yɛ Nneɛmayɛ nhyehyɛe a ɛkɔ so a ɛyɛ dade coil ma ɛyɛ spiral pipe na ɛde submerged arc welding weld seam no de yɛ welded pipes akɛse-diameter.

Q2: Pipe diameter range bɛn na SSAW Pipe Production Line betumi ayɛ?

A: OD range no yɛwotumi sesa no sɛnea wopɛna titiriw gyina forming unit (forming angle) ne welding / handling nhyehyɛe so.

Q3: Nnwinnade bɛn na ɛka SSAW Pipe Production Line a wɔtaa yɛ no ho?

A: A typical line bi ne coil loading & leveling, edge ahosiesie, spiral forming, mu / akyi SAW welding, twa - to - tenten, awiei wie, ne optional inspection / sɔhwɛ modules.

Q4: Nsɛm bɛn na Octal Pipe hia na ama wɔafa SSAW line a wɔayɛ no sɛnea wɔpɛ?

A: OD & thickness window, botaeɛ gyinapɛn, afe afe tumi/shift nhyehyɛeɛ, NDT/hydrotest scope a wɔhwehwɛ, pipe tenten nhyehyɛeɛ, ne adwumayɛbea nhyehyɛeɛ anohyetoɔ.

Adansedi nkrataa

 

CE Adansedi Krataa

ISO 9001 Adansedi krataa

API Q1 Adansedi krataa

ABS Adansedi krataa

AP-5L Adansedi krataa

API-5CT Adansedi krataa

 

Tags a ɛyɛ hyew .: SSAW Pipe a wɔyɛ Line,Pipe a wɔyɛ Line,Octal Pipe,spiral paipu a wɔyɛ